“USS Enterprise 企业”号航空母舰 CVn - 65

old_cobra

USS Enterprise CVn-65

by Philip LaVoie
1/350 (Tamiya)

After completing the Enterprise CV-6, I jumped in and started on the CVN-65. She's modeled as appearing in 2001 during Operation Enduring Freedom. All detail was sanded from the deck and custom decals fabricated for the fine stripes while other details were painted on. The catwalks were all removed and I rebuilt them using perforated brass. The Phalanx aft port and bridge deck platforms were rebuild, LSO platform added and various radar blisters added where needed. All aircraft were replaced by Trumpeter ones. The Hornets and Prowlers were kind of a pain being the canopies are not molded separately and they are cast in clear plastic.

These are the aftermarket sets I used:

    * Tom's Modelworks Photo Etch USN Carrier (Photo Etchrforated) catwalks w/rails
    * Trumpeter Aircraft C2 Greyhounds; E2-C Hawkeyes; EA6B Prowlers; F/A18 Hornets (3 boxes); F-14D Tomcats (3 boxes); S-3B Vikings and SH60F Oceanhawk Helicopters.
    * Gold Medal USN Nuclear carrier decals
    * Veteran Models Modern US Navy Rigid Hull & Personnel Boats
    * Veteran Models Modern US Phalanx CIWS
    * White Ensign Photo Etch USS Enterprise Airwing w/Flight Deck Vehicles Detail Set
    * White Ensign Photo Etch USS Enterprise Detail Set for Tamiya kit
    * Iron Shipwrights Modern USN Carrier Deck Tractors
    * Tom's Modelworks Enterprise Floatation racks
    * Lionroar Perforated Floor for NAVY Vessels
    * Starfighter Decals 350-21 Carrier Air Wing 8 2001 USS Enterprise CVN-65
    * Fujimi figures

“企业”号航空母舰 CVn - 65

制作者：菲利普•拉沃伊
比例：1/350
套材：田宫

在完成了“企业”号CV-6，我投入并开始了CVn-65。她是模仿2001年出现在永久自由行动期间的。所有的甲板零件都抛光，定制的贴花构造精美的线条，而其他零件涂漆。所有的过道被删除，我用穿孔的黄铜重新制作。船尾的方阵港口和桥面平台重建的，增加了LSO平台，并根据需要增加了各种雷达罩。所有飞机改为“号手”的。“黄蜂”和“徘徊者”有几分讨厌的座舱罩不是分开成型的，他们是透明塑料弯曲的。

这些都是我使用的配件：
     * Tom's Modelworks的蚀刻的USN航空母舰（蚀刻件）过道/带导轨
     * “号手”的飞机C2“灰狗”；E2-C型“鹰眼”；EA6B“徘徊者”；F/A18“黄蜂”（3盒）；F-14D“雄猫”（3盒）；S-3B“海盗”和SH60F海上直升机
      * Gold Medal的美国海军核动力航母贴
    * Veteran Models Modern的美国海军刚性船体及人员小艇
     * Veteran Models Modern的方阵CIWS
      * White Ensign的蚀刻“企业”号Airwing带飞行甲板车辆零件套件
      * White Ensign为田宫套材配套的蚀刻“企业”号零件套件
      * Iron Shipwrights Modern的USN航空母舰甲板牵引机
    * Tom's Modelworks的“企业”号浮选机架
      * Lionroar的针对海军舰艇的镂空板
      * 2001年8月“企业”号CVn-65航空母舰所属空军的星式贴花350-21
     * Fujimi的人偶

dudu

哈哈，我自己也有一艘企业号航母。[fbdsbsb]

old_cobra

哈哈，我自己也有一艘企业号航母。[fbdsbsb]
dudu 发表于 2009-8-14 13:08

拿出来展示一下嘛~~[fbdsbsb]

aucmaswcw

[vse4bb][vse4bb][vse4bb]

saill

[vse4bb][vse4bb][vse4bb]

同歆

楼主偏爱小比例？

郭大路

不错，就是飞机的精度差点